Top videos | TurtleTube

Home

Top videos

All Time

Today

This week

This month

This year

Restoring a Craftsman LT2000 Riding Lawnmower - New Battery UDoIt 1,527,724 Views • 9 months ago

In this video, I'm restoring a Craftsman LT2000 Riding Lawnmower. This is the first part of the journey as I discover each issue and attempt to resolve it. I bought this lawnmower in 2006 when we bought our second home on a 1/2 acre property. Mowing the property with a 21" walk-behind lawnmower, although a great way to exercise combined with landscaping maintenance, is a time killer. So I purchased this Craftsman LT2000 lawnmower from a Sears outlet store for $1,500.

After several years of owning our property, Mrs U Do It took over the lawn care as I was becoming too busy with my job and side hustles. This got old quickly and eventually, we hired a lawn crew. This lawnmower sat in our shed for the remainder of the time at our property. When we moved to our latest home there was simply no storage for our mower. It sat outside for over six years through extreme conditions, including rain, snow, below zero, and above 100 degrees Fahrenheit. We continued with a lawn service on a current home and still had no need for the mower. Our friends tried to convince us to sell it but I knew this mower would be a great source of content and that's where we are now; hence this video.

Again, the first step in this process is to replace the battery and see if I could start the mower. After replacing the battery, you'll hear that the starter is working but the engine is not cranking over. At this point, I was done. I ordered a new carburetor, air filter, and fuel filter. What's not shown in this video, is I replaced the carburetor and found the problem with the engine not cranking over. The engine wouldn't crank because the v-belt was stuck to the engine pulley. Furthermore, the drive train is seized. The engine wouldn't crank over because the v-belt is connected to the seized drive train. This will be another video.

You'll notice in the video that I'm able to start the engine after spraying some starting fluid in the air intake. I'm pleased with the progress and this shows that even with a little knowledge about engines you can fix something that's broken.
⁣To learn more about this restoration and other projects on U Do It™ visit: https://udoit.me/installing-ne....w-battery-in-a-craft

The tools and materials used in this video are as follows:
Mighty Max Battery ⁣ML-U1-CCAHR: ⁣https://amzn.to/3IEa6SK
Kaiweets DMM: ⁣https://amzn.to/3Y7fVO2
Socket Set: ⁣https://amzn.to/3XYJVvr
Torx Bit Set: ⁣https://amzn.to/3KEjlER

#craftsman #craftsmanlt2000 #lt2000ridinglawnmower #craftsmanridinglawnmower #howtoreplaceabatteryinalawnmower #howtoreplaceabatteryinaridinglawnmower #craftsmanlt2000batteryreplacement #groupu1battery #u1batteryreplacementonridinglawnmowers #ridingmower #ridinglawnmower #ridingmowers #craftsmanridingmower #udoit #realudoit #turtlecreator #turtletubecreator #turtletube #turtlehomenetwork #diywithudoit #diy #homeworks #homeimprovement #honeydos #howto

U Do It Using Construction Calculator To Determine Diagonal For Reference Pins UDoIt 1,468,306 Views • 7 months ago

⁣U Do It Using Construction Calculator To Determine Diagonal For Reference Pins

I am building a shed in my backyard. The location of the shed is based on my preference and also the setback on the property. The setback of my property is 6 feet but I'm giving it an additional 3 feet buffer by building the shed almost 9 feet from the rear of the property.

I first used marking paint in an area based on very rough measurements. I needed to know if this was definitely going to work. Once I marked it out I became more deliberate in my actions.

I know I want the shed to be parallel with the back of our house. So I placed two rebar stakes 207 inches apart in the area where I expect to build the shed. Then, I placed two pins 320 inches from these two stakes square with them. I was able to use my Craftsman Construction Calculator to determine the diagonal, which was about 381 inches.

Having these rebar pins out in the open is dangerous as you could fall on them and get impaled. So I cut sections of 4x4 lumber and drilled a 9-16ths inch hole in them to cap the rebar. Falling on them would still hurt and result in injury but it would be much better than being impaled.

Drilling the holes I used my Bosch boring bit set along with my DeWalt drill. I am very impressed with the drill. It nearly broke my wrist as you can see in the video.

To learn more about this visit U Do It⁣™ here: ⁣https://udoit.me/where-to-buil....d-a-shed-in-our-back
DeWalt 20V MAX Cordless Drill / Driver Kit DCD771C2 ⁣https://amzn.to/3VOJHri
Calculated Industries 4325 Construction Calculator ⁣⁣https://amzn.to/3nRBNAP
DeWalt 100-foot Tape Measure ⁣https://amzn.to/41hZWy9
Neon Yellow Mason Line ⁣https://amzn.to/3BbF4hx
DeWalt 7⁣ 1/4 inch MAX XR Circular Saw DCS574B ⁣https://amzn.to/3NVFtw1
Bessy Clamp ⁣Woodworking Clamp https://amzn.to/3VQKN5N
⁣Bosch Daredevil Spade Bit Set https://amzn.to/3pxxxXC
Carpentry and Building Construction Textbook https://amzn.to/3nOSAEO

⁣Video Asset owned by: No Cheese Records LLC
Rights Management for this video: U Do It Studios
Publishing for this video: Bigginz Publishing
Video: © 2022 U Do It Studios
⁣⁣© Copyright 2022 Bigginz Publishing
⁣℗ Copyright 2022 No Cheese Records
Divisions of No Cheese Records LLC. All rights reserved.

Song: Anti Cheese Instrumental (2023 Release)
℗ Bigginz Publishing

“As an Amazon Associate I earn from qualifying purchases.”

#udoit #diy #diywithudoit #homeimprovement #honeydos #construction #homeconstruction #mancave #turtlecreator #turtletube

This pressure washer quickly cleans concrete and siding UDoIt 1,193,653 Views • 9 months ago

⁣⁣⁣This pressure washer quickly cleans concrete and siding
The MUTAOMAY 3500PSI Gas Pressure Washer provides 2.3GPM cleaning power with its 209cc engine and pump. As you can see in this video, it is easy to assemble, fill up with oil and gas, hook up the water supply, choose the appropriate spray nozzle, and begin cleaning. MUTAOMAY was kind enough to send me this Pressure Washer for evaluation.

The directions were clear with only slight translation issues, which I will provide them with feedback on. There was a clear indication with a tag that the unit was shipped without oil. The pressure washer starting instructions were easily understood combined with the images.

The holder for the pressure washer wand works as expected when the hose is not attached. Please note that when the hose is attached, the wand does not sit in the holder properly. I believe it was designed to hold the wand without the hose. You could secure it with a piece of velcro. My feedback to MUTAOMAY is to include a velcro strap that is attached to the wand holder to wrap around the wand.

My only safety observation with high-powered pressure washers in general is that they are so powerful when they run they move easily. This can be a safety or property issue that you need to consider. You would not want the pressure washer bumping into your vehicle as you are using it. And, you would not want it skipping down the driveway either. Perhaps you need to purchase wheel chocks and put them under the wheel. Consider the area and what safety precautions you must take to avoid an accident and damage.

⁣To learn more about this on ⁣U Do It™ in this article here: https://udoit.me/quickly-clean....-concrete-and-siding
MUTAOMAY 3500PSI Gas Pressure Washer: https://amzn.to/3TbUTx4
Simple Green Oxy Solve Total Outdoor Pressure Washer Cleaner: https://amzn.to/3Fiinut
Simple Green Oxy Solve Concrete and Driveway Pressure Washer Cleaner, Purple, Unscented: https://amzn.to/3J5RhIh
⁣U Do It™ Pressure Washer Essentials List: ⁣https://amzn.to/3yuloEr

Video Credits:
Video Production: U Do It™ Studios a Division of No Cheese Records™ LLC All Rights Reserved.
#pressurewasher #3500psi #3500psipressurewasher #mutaomaypressurewasher #mutaomay #mutaomay3500psipressurewasher #howtocleanconcrete #howtocleanconcretewithapressurewasher #cleaningsidewalkwithapressurewasher #howtocleanyourdrivewaywithapressurewasher #udoit #udoit2 #realudoit #diywithudoit #turtlehomenetwork #turtlecreator #turtletubecreator #turtletube

Why are my headlights no longer clear? Remastered UDoIt 1,048,832 Views • 7 months ago

⁣⁣In this video we answer the question "Is it possible to restore your headlights to factory new?" Headlight covers are made of plastic and over time they oxidize and become hazy or yellowish. This is because more dangerous over time as your headlight brightness diminishes. To restore your headlights you need to remove the oxidized plastic. To remove it, there is a graduated process to sand down the headlights and finally buff them.

3M provided a solution to do just that. The 3M Headlight Restoration System 39008 comes complete with sanding discs, a buffing pad, buffing compound, and an arbor. The 3M Headlight Restoration System was created to help you restore your headlights own your own without visiting an autobody shop or car detailer. You can restore your headlights in your own driveway or garage on your own timeline.

To learn more about this process and others on UDoIt™ visit: https://udoit.me/is-it-possibl....e-to-restore-headlig
3M Headlight Restoration System 39008 that I used (requires a power drill): https://amzn.to/2zpMoXW
3M Headlight Restoration System 39084 (does not require a drill): https://amzn.to/2zpWesE
3M Headlight Clear Coat 39173: https://amzn.to/2NzP8L0
U Do It™ Headlight Restoration Products List: https://amzn.to/3TXKvZ0

In this video we restore the headlights on this Convertible Pontiac G6.
0:00 Intro to the 3M Headlight Restoration System
0:43 Using Frog Tape to tape around headlights
0:49 Using Gold P500 Grit Sanding Disc
0:59 Using White P800 Grit Sanding Disc
1:07 Using the Green / Grey P300 Grit Sanding Disc
1:14 Spraying water on the surface to ensure wet sanding
1:39 Wipe the surface with a clean cloth
1:47 Replace the P300 Disc with the Buffing Pad
1:52 Apply Buffing Compound Directly to the Buffing Pad
2:09 Using a clean cloth wipe the headlight
2:14 Summary of the 3M Headlight Restoration System
2:28 Credits

I have foggy headlights. It appears that the plastic lens on the headlight oxidizes or becomes damaged by the sun. The restoration kit contains fine grit sandpaper that can be used to sand down the headlight lens followed by the last step which buffs the lens with a buffing compound and a buffing applicator. I am very impressed with this headlight restoration kit. To use this kit you will need a drill. I used a rigid right-angle drill for the headlight restoration.

I purchased two kits. One for my son's car and one for my truck. There are enough sanding discs and buffing compounds to easily restore the headlights of three cars. In other words, I only needed to purchase one kit for two vehicles.

After you are finished with the Headlight Restoration you may want to apply the 3M Quick Headlight Clear Coat, which protects the headlights for twice as long (when followed immediately after using the 3M Headlight Restoration kit).

⁣Video Production: U Do It™ Studios a Division of No Cheese Records™ LLC All Rights Reserved.

#udoit #diy #diywithudoit #turtletube

Showing 1 out of 2

Please note that if you are under 18, you won't be able to access this site.

Top videos All Time Today This week This month This year

Language

Top videos

All Time

Today

This week

This month

This year